Post by tsmiley98 on Apr 7, 2012 1:24:39 GMT -5
Well I decided to finally dive into repairing the twin that Brandon found out does not like to turn right without ripping off the brakes.
She started something like this after I straightened the lever back around.
Some help with the torch and it was already starting to look like an improvement.
I didn't quite like the foot peg location or feel, so time to take it down to the frame and start over.
I a little cutting and welding I made the peg bracket forward a couple inches and out about an inch.
Back to the brake lever issue... BFH anyone?
All done except I found out the line was torn at the fitting from the accident... new line tomorrow and she is ready to race.
She started something like this after I straightened the lever back around.
Some help with the torch and it was already starting to look like an improvement.
I didn't quite like the foot peg location or feel, so time to take it down to the frame and start over.
I a little cutting and welding I made the peg bracket forward a couple inches and out about an inch.
Back to the brake lever issue... BFH anyone?
All done except I found out the line was torn at the fitting from the accident... new line tomorrow and she is ready to race.
